Comfort

A lift bed with a real garage underneath.

The lift bed makes the difference. By day it hangs at 1,700 mm with a garage below it that takes a bicycle upright, and standing height in the aisle beside it. Then you lower it on a hand winch to 1,050 mm and you have a double bed you do not have to make up every evening. It comes with the full 1,020 mm galley, including room for a compressor fridge. This is exactly the layout professional fitters charge € 30,000 for.

Who it is for

Anyone using their van as a second home and bringing gear: bicycles, a board, tools. And anyone tired of making up a bed every evening.

• Lift bed with 650 mm travel, worked by hand winch
• A 1.45 m deep garage — a bicycle stands upright in it
• Kitchen 1020 with room for a compressor fridge
• Needs 1,850 mm of load height: H2 vans only

Fits these vans

Manufacturers measure load spaces differently: sometimes at the narrowest point, sometimes at the widest, sometimes with and sometimes without the original wall lining. The difference can be 30 to 50 mm — and at 'tight' that is exactly the difference between fitting and not. Measure your own van and enter it in the configurator. Your measurement always beats our table.