Skip to content
Vanquarters

Samples and services

Three things that are not furniture but do make the difference: a sample kit so you see the colours for real, a measuring service so the dimensions are right, and spare hardware sets for when something rolls away. You get the first two back as soon as you order.

Sample kit with all seven fronts

Seven 10 × 10 cm front samples in the post. You get the money back.

A screen lies about colour. You only see the difference between matt lacquer and real veneer when you hold them side by side, and dark green on a phone is something else entirely in a van with one window. So we post seven 10 × 10 cm samples, cut from the same batch we build from. Order afterwards and the € 7.50 comes off again — so in the end it costs you nothing.

  • All seven fronts: white, four lacquered colours and two real veneers
  • Cut from the same batch we build from
  • Plus a piece of birch plywood and a length of 20 × 20 profile
  • € 7.50 comes off your first order
€8€8 back when you order

We measure your van

We come by, measure everything and put it into your configuration. Deducted from your order.

Measuring is the only part of this whole process where something can genuinely go wrong, and it is exactly the part most people are unsure about. We come by with a measuring jig, survey the load space to the millimetre, check the wheel arches and body pillars, and put the dimensions into a configuration you can then adjust yourself. Order within three months and the full amount comes off your order.

  • Load length, width and height to the millimetre
  • Width between the wheel arches and the position of the body pillars
  • Your registration weights included, so the payload is right too
  • The full amount comes off your order
  • Within 60 km of Someren; further afield by arrangement
€95€95 back when you order

Spare hardware set

Corner connectors, bolts and T-nuts. For when one rolls away.

One lost corner connector should not become an email, let alone a stalled build. This set holds ten corner connectors, twenty M5 bolts with T-nuts and four panel clips — enough to cover any mishap. Within the first year we send the first set free; just ask.

  • 10 corner connectors for 20 × 20 profile
  • 20 M5 bolts with T-nuts
  • 4 panel clips
  • Within 5 years of purchase: first set free on request
€18

Build drawing Kitchen 643 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Kitchen 866 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Kitchen 1066 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Kitchen 1266 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Cupboard 443 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Cupboard 643 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Bench 866 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Bench 1266 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Bench bed 1266 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Seat 643 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Transverse bed 1400 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Slide-out bed 1600 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

Build drawing Lengthwise bed 2050 — in wood

Cutting list, dimensions and assembly order. Entirely from sheet material.

The same dimensions as our aluminium piece, but built from 18 mm sheet material: screwed and glued, without a single profile. You get every part with its size, the cutting plan against stock sheets, the hardware that suits wood and the order to assemble it in.

  • Every part with its size and quantity
  • Cutting plan against builders-merchant sheet sizes
  • Cup hinges and hardware that suits wood
  • The amount comes off a later furniture order
€29€29 back when you order

All build drawings — in wood

Every piece at once, well below the sum of the separate drawings.

Anyone building a whole van needs every dimension, not one. This is the complete set: each piece in the range as a wooden version, with cutting list, cutting plan and hardware. Enough to build any layout we have costed.

  • Every piece in the range, as a wooden version
  • Enough to build any costed layout
  • Well cheaper than the drawings separately
  • The amount comes off a later furniture order
€79€79 back when you order

Would you rather not assemble the furniture yourself? We can do it: we build it and fit it in your van.

Fitting service →

Workshop in Someren.