Lengthwise bed
Lengthwise bed
A fixed full-width bed with the largest garage.
- Aisle
- 687 mm
- Sleeping surface
- 1787 × 2050
- Garage
- 2.6 m³
- Furniture weight
- 191 kg
The bed stays put. A fixed 2,050 mm platform across the full load width, so you sleep stretched out along the van and never have to slide or make up anything. Below it the largest garage we draw: on the highest setting a bicycle rolls in upright, loaded from the rear doors. Ahead of it a 1,060 mm galley and two tall cupboards. This bed costs 2.05 m of your length and therefore only fits a long van — the configurator says exactly from which size.
Who it is for
Anyone with an L3 or L4 van who uses it as a second home. You bring bikes, a board or tools and you do not want to build around them every evening.
- 2,050 mm of sleeping length, never made up or slid out
- The largest garage in the range
- A tall cupboard by the sliding door for your coats
- Works at any van width, because you sleep lengthwise
Fits these vans
Min. load length 3,659 mm · Min. load width 1,600 mm · Min. load height 1,550 mm
| Van and trim | Length | Width | Space left |
|---|---|---|---|
| Fiat Ducato L3H2 | 3705 | 1870 | tight · +46 mm |
| Renault Master L3H2 | 3733 | 1765 | tight · +74 mm |
| Fiat Ducato L4H2 | 4070 | 1870 | +411 mm |
| VW Crafter / MAN TGE L3H2 | 4300 | 1832 | +641 mm |
| Mercedes Sprinter L3H2 | 4307 | 1787 | +648 mm |
| Citroen Jumper L3H2 | 3705 | 1870 | tight · +46 mm |
| Peugeot Boxer L3H2 | 3705 | 1870 | tight · +46 mm |
| Opel Movano L3H2 | 3733 | 1765 | tight · +74 mm |
| Mercedes Sprinter L4H2 | 4707 | 1787 | +1048 mm |
Manufacturers measure load spaces differently: sometimes at the narrowest point, sometimes at the widest, sometimes with and sometimes without the original wall lining. The difference can be 30 to 50 mm — and at 'tight' that is exactly the difference between fitting and not. Measure your own van and enter it in the configurator. Your measurement always beats our table.
Frequently asked questions
- Which vans does the Lengthwise bed layout fit?
- The Lengthwise bed layout fits 9 van models, including Fiat Ducato L3H2, Renault Master L3H2, Fiat Ducato L4H2, VW Crafter / MAN TGE L3H2. You need at least 3,659 mm of load length, 1,600 mm of width and 1,550 mm of height. The full list with the clearance per van is in the table on this page.
- How big is the sleeping surface of the Lengthwise bed layout?
- 1787 by 2050 millimetres, worked out for a Mercedes Sprinter L3H2. That is the real dimension including wall thickness, not the nominal mattress size — in a wider or narrower van it shifts, and the configurator recalculates it for your own measurements.
- What does the Lengthwise bed layout weigh?
- The furniture itself weighs 191 kg. That comes straight off your payload. Water, gas, batteries, luggage and the people are on top of it; reckon on another 350 to 450 kilos for two people travelling.
- What does the Lengthwise bed layout cost and when does it arrive?
- €2,235 as a complete layout, against €2,485 if you order the same sets separately. Fronts are included. We cut to size on order, so the lead time is 5 working days. Order today and it ships on Thursday 29 October.
- How much aisle is left with the Lengthwise bed layout?
- 687 mm in a Mercedes Sprinter L3H2, with 2.6 m³ of garage left over. Below 550 mm you pass sideways; above 650 mm two people pass each other. In a wider van it grows automatically.
Choose your front colour
White
What is in it
| 1× | Lengthwise bed 2050 |
| 1× | Kitchen 1066 |
| 1× | Bench 866 |
| 1× | Cupboard 643 |
- Bought separately
- €2,485
- You save
- − €250
- As a layoutincl. VAT
- €2,235
We cut to size on order, not from stock. Delivery in 5 working days.