Slide-out bed
Slide-out bed with seating
The same bed, with a full galley and a bench to sit on.
- Aisle
- 687 mm
- Sleeping surface
- 1787 × 2050
- Garage
- 1.92 m³
- Furniture weight
- 195 kg
If you have more length, it goes to the galley and to a place to sit. The 1,060 mm galley has a sink, a hob, worktop beside it and a bay for a compressor fridge; opposite it a bench runs along the wall. At the rear the slide-out bed with the garage below. This is the layout you can travel for weeks with.
Who it is for
Two people who spend weeks in the van, cook for themselves and want to sit inside when it rains.
- 2,050 mm of sleeping length plus a real galley
- Bench along the wall: sit inside when it rains
- Full-width garage under the bed
Fits these vans
Min. load length 3,209 mm · Min. load width 1,600 mm · Min. load height 1,550 mm
| Van and trim | Length | Width | Space left |
|---|---|---|---|
| Mercedes Sprinter L2H2 | 3272 | 1787 | tight · +63 mm |
| VW Crafter / MAN TGE L2H2 | 3450 | 1832 | +241 mm |
| Ford Transit L3H2 | 3494 | 1784 | +285 mm |
| Iveco Daily L3H2 | 3540 | 1800 | +331 mm |
| Fiat Ducato L3H2 | 3705 | 1870 | +496 mm |
| Renault Master L3H2 | 3733 | 1765 | +524 mm |
| Fiat Ducato L4H2 | 4070 | 1870 | +861 mm |
| VW Crafter / MAN TGE L3H2 | 4300 | 1832 | +1091 mm |
| Mercedes Sprinter L3H2 | 4307 | 1787 | +1098 mm |
| Citroen Jumper L3H2 | 3705 | 1870 | +496 mm |
| Peugeot Boxer L3H2 | 3705 | 1870 | +496 mm |
| Opel Movano L3H2 | 3733 | 1765 | +524 mm |
| Mercedes Sprinter L4H2 | 4707 | 1787 | +1498 mm |
Manufacturers measure load spaces differently: sometimes at the narrowest point, sometimes at the widest, sometimes with and sometimes without the original wall lining. The difference can be 30 to 50 mm — and at 'tight' that is exactly the difference between fitting and not. Measure your own van and enter it in the configurator. Your measurement always beats our table.
Frequently asked questions
- Which vans does the Slide-out bed with seating layout fit?
- The Slide-out bed with seating layout fits 13 van models, including Mercedes Sprinter L2H2, VW Crafter / MAN TGE L2H2, Ford Transit L3H2, Iveco Daily L3H2. You need at least 3,209 mm of load length, 1,600 mm of width and 1,550 mm of height. The full list with the clearance per van is in the table on this page.
- How big is the sleeping surface of the Slide-out bed with seating layout?
- 1787 by 2050 millimetres, worked out for a Mercedes Sprinter L3H2. That is the real dimension including wall thickness, not the nominal mattress size — in a wider or narrower van it shifts, and the configurator recalculates it for your own measurements.
- What does the Slide-out bed with seating layout weigh?
- The furniture itself weighs 195 kg. That comes straight off your payload. Water, gas, batteries, luggage and the people are on top of it; reckon on another 350 to 450 kilos for two people travelling.
- What does the Slide-out bed with seating layout cost and when does it arrive?
- €2,395 as a complete layout, against €2,660 if you order the same sets separately. Fronts are included. We cut to size on order, so the lead time is 5 working days. Order today and it ships on Thursday 29 October.
- How much aisle is left with the Slide-out bed with seating layout?
- 687 mm in a Mercedes Sprinter L3H2, with 1.92 m³ of garage left over. Below 550 mm you pass sideways; above 650 mm two people pass each other. In a wider van it grows automatically.
Choose your front colour
White
What is in it
| 1× | Slide-out bed 1600 |
| 1× | Kitchen 1066 |
| 1× | Bench 866 |
| 1× | Cupboard 643 |
- Bought separately
- €2,660
- You save
- − €265
- As a layoutincl. VAT
- €2,395
We cut to size on order, not from stock. Delivery in 5 working days.