Skip to content
Vanquarters
← All layouts

Slide-out bed

Slide-out bed with two seats

At night the bed slides out over the two seats.

Drawn in a Mercedes Sprinter L3H2
cab
cabfree space998 mm leftGaragethe full widthSlide-out bed 1600day position — pushed inSeat 643facingKitchen 1066worktop at 890Seat 643along the wallCupboard 643h 1740rear doorsload length 4.307 mm1.787 mm
Aisle
787 mm
Sleeping surface
1787 × 2050
Garage
1.92 m³
Furniture weight
204 kg

A seating group of two benches costs 1,266 mm of load length you do not use at night. Two separate 643 mm seats cost the same length, but here the extended bed rests on them: the platform slides 450 mm forward and lands on the seats, giving you 2,050 mm of sleeping length without a leg in the aisle. By day you sit facing each other. The galley sits ahead, opposite a tall cupboard.

Who it is for

Anyone with a large van who wants to sit inside and still have a two-metre bed without walking around it all day.

  • Two 643 mm seats instead of a bench: the aisle stays clear
  • The extended bed rests on the seats, not on a separate leg
  • 2,050 mm sleeping length at night, 1,600 mm by day
  • 1,060 mm galley opposite a tall cupboard

Fits these vans

Min. load length 3,409 mm · Min. load width 1,600 mm · Min. load height 1,550 mm

Van and trimLengthWidthSpace left
VW Crafter / MAN TGE L2H234501832tight · +41 mm
Ford Transit L3H234941784tight · +85 mm
Iveco Daily L3H235401800+131 mm
Fiat Ducato L3H237051870+296 mm
Renault Master L3H237331765+324 mm
Fiat Ducato L4H240701870+661 mm
VW Crafter / MAN TGE L3H243001832+891 mm
Mercedes Sprinter L3H243071787+898 mm
Citroen Jumper L3H237051870+296 mm
Peugeot Boxer L3H237051870+296 mm
Opel Movano L3H237331765+324 mm
Mercedes Sprinter L4H247071787+1298 mm

Manufacturers measure load spaces differently: sometimes at the narrowest point, sometimes at the widest, sometimes with and sometimes without the original wall lining. The difference can be 30 to 50 mm — and at 'tight' that is exactly the difference between fitting and not. Measure your own van and enter it in the configurator. Your measurement always beats our table.

Frequently asked questions

Which vans does the Slide-out bed with two seats layout fit?
The Slide-out bed with two seats layout fits 12 van models, including VW Crafter / MAN TGE L2H2, Ford Transit L3H2, Iveco Daily L3H2, Fiat Ducato L3H2. You need at least 3,409 mm of load length, 1,600 mm of width and 1,550 mm of height. The full list with the clearance per van is in the table on this page.
How big is the sleeping surface of the Slide-out bed with two seats layout?
1787 by 2050 millimetres, worked out for a Mercedes Sprinter L3H2. That is the real dimension including wall thickness, not the nominal mattress size — in a wider or narrower van it shifts, and the configurator recalculates it for your own measurements.
What does the Slide-out bed with two seats layout weigh?
The furniture itself weighs 204 kg. That comes straight off your payload. Water, gas, batteries, luggage and the people are on top of it; reckon on another 350 to 450 kilos for two people travelling.
What does the Slide-out bed with two seats layout cost and when does it arrive?
€2,830 as a complete layout, against €3,145 if you order the same sets separately. Fronts are included. We cut to size on order, so the lead time is 5 working days. Order today and it ships on Thursday 29 October.
How much aisle is left with the Slide-out bed with two seats layout?
787 mm in a Mercedes Sprinter L3H2, with 1.92 m³ of garage left over. Below 550 mm you pass sideways; above 650 mm two people pass each other. In a wider van it grows automatically.

Choose your front colour

White

What is in it

1×Slide-out bed 1600
2×Seat 643
1×Kitchen 1066
1×Cupboard 643
Bought separately
€3,145
You save
− €315
As a layoutincl. VAT
€2,830
Adjust this layout

We cut to size on order, not from stock. Delivery in 5 working days.