Seating group
Bench bed only
Just the bed. The only layout that fits an L1.
- Sleeping surface
- 1266 × 1870
- Aisle
- 1,870 mm
- Garage
- 0 m³
- Payload left
- 972 kg
€1,315+1754 mm space left
Adjust this layout← All vans
Building a camper in a Peugeot Boxer L2H2
- Load length
- 3,120 mm
- Load width
- 1,870 mm
- Load height
- 1,932 mm
- Between the wheel arches
- 1,422 mm
- Kerb weight
- 2,050 kg
- Gross vehicle weight
- 3,500 kg
This van is 1.870 mm wide, which is 30 mm short of sleeping across it if you are 1.80 m. That is the single most important thing to know about this model: a transverse bed physically fits, but you will not lie stretched out. For a fixed bed here you want the slide-out or the lengthwise bed — those sleep along the van and reach 2.050 mm whatever the width.
Of the ten layouts we have costed, 6 fit this model with room to spare. The fullest is the Transverse bed with seating: it leaves 770 mm of aisle and weighs 173 kg, leaving you 897 kg of payload for water, batteries, bikes and yourself.
Between the wheel arches it is 1.422 mm. That number matters more than the load width, because everything that runs along the floor — a bed, a bench, a run of cupboards — has to pass it or clear it. That is why our frames stand on adjustable feet and not on a continuous plinth.
What this van brings
- Standing height: 1.932 mm
What to watch out for
- Too narrow to sleep across: 30 mm short
- Dimensions from the manufacturer, not measured by us
These dimensions come from the manufacturer and have not been measured by us yet. Manufacturers measure differently; expect a deviation of 30 to 50 mm and measure your own van before ordering.
Configure this van →Layouts that fit in this van (6)
Transverse bed
Transverse bed
The most frugal fixed bed: it costs only 1.40 m of length.
- Sleeping surface
- 1400 × 1870
- Aisle
- 870 mm
- Garage
- 1.67 m³
- Payload left
- 939 kg
€1,505+754 mm space left
Adjust this layoutSeating group
Seating group
Two benches along the walls that become one bed at night.
- Sleeping surface
- 1266 × 1870
- Aisle
- 1,370 mm
- Garage
- 0 m³
- Payload left
- 936 kg
€1,645+1111 mm space left
Adjust this layoutSlide-out bed
Slide-out bed
A fixed bed with a garage that slides out to 2.05 m at night.
- Sleeping surface
- 1870 × 2050
- Aisle
- 870 mm
- Garage
- 1.91 m³
- Payload left
- 925 kg
€1,810+554 mm space left
Adjust this layoutTransverse bed
Transverse bed with a seat
A fixed bed, a full galley and still somewhere to sit.
- Sleeping surface
- 1400 × 1870
- Aisle
- 870 mm
- Garage
- 1.77 m³
- Payload left
- 918 kg
€1,975+534 mm space left
Adjust this layoutTransverse bed
Transverse bed with seating
Transverse bed, a big galley and a bench to sit on.
- Sleeping surface
- 1400 × 1870
- Aisle
- 770 mm
- Garage
- 1.67 m³
- Payload left
- 897 kg
€2,045+311 mm space left
Adjust this layoutWhat does not fit, and why
Slide-out bed with seating
You need 3209 mm and your van has 3120 mm of load length. You are 89 mm short.
Lengthwise bed
You need 3659 mm and your van has 3120 mm of load length. You are 539 mm short.
Lengthwise bed with seating for four
You need 4282 mm and your van has 3120 mm of load length. You are 1162 mm short.
Slide-out bed with two seats
You need 3409 mm and your van has 3120 mm of load length. You are 289 mm short.