Transverse bed

Transverse bed with a seat

A fixed bed, a full galley and still somewhere to sit.

The transverse bed costs only 1,400 mm of your length, which is exactly why there is room for more than a galley alone. Opposite the worktop stands a single 643 mm seat: enough to eat or put your shoes on, without the 1,266 mm a bench costs. A narrow cupboard sits ahead. The garage under the bed loads from the rear doors.

Who it is for

Two people in a mid-size van with at least 1,800 mm of load width, who would rather have a real galley than a large seating area.

• The thriftiest bed: it costs only 1,400 mm of load length
• One 643 mm seat instead of a 1,266 mm bench
• Full-width garage, loaded from the rear doors
• Needs at least 1,800 mm of load width — you sleep across

Fits these vans

Min. load length 2,586 mm · Min. load width 1,800 mm · Min. load height 1,550 mm

Manufacturers measure load spaces differently: sometimes at the narrowest point, sometimes at the widest, sometimes with and sometimes without the original wall lining. The difference can be 30 to 50 mm — and at 'tight' that is exactly the difference between fitting and not. Measure your own van and enter it in the configurator. Your measurement always beats our table.

Frequently asked questions

Which vans does the Transverse bed with a seat layout fit?

The Transverse bed with a seat layout fits 27 van models, including Renault Trafic L2H1, Ford Transit Custom L2H1, VW Transporter L2H1, Mercedes Vito L2H1. You need at least 2,586 mm of load length, 1,800 mm of width and 1,550 mm of height. The full list with the clearance per van is in the table on this page.

How big is the sleeping surface of the Transverse bed with a seat layout?

1400 by 1870 millimetres, worked out for a Fiat Ducato L2H2. That is the real dimension including wall thickness, not the nominal mattress size — in a wider or narrower van it shifts, and the configurator recalculates it for your own measurements.

What does the Transverse bed with a seat layout weigh?

The furniture itself weighs 152 kg. That comes straight off your payload. Water, gas, batteries, luggage and the people are on top of it; reckon on another 350 to 450 kilos for two people travelling.

What does the Transverse bed with a seat layout cost and when does it arrive?

€1,975 as a complete layout, against €2,195 if you order the same sets separately. Fronts are included. We cut to size on order, so the lead time is 5 working days. Order today and it ships on Thursday 29 October.

How much aisle is left with the Transverse bed with a seat layout?

870 mm in a Fiat Ducato L2H2, with 1.77 m³ of garage left over. Below 550 mm you pass sideways; above 650 mm two people pass each other. In a wider van it grows automatically.