Seating group
Bench bed only
Just the bed. The only layout that fits an L1.
- Sleeping surface
- 1266 × 1765
- Aisle
- 1,765 mm
- Garage
- 0 m³
- Payload left
- 1,012 kg
€1,315+1717 mm space left
Adjust this layout← All vans
Building a camper in a Renault Master L2H2
- Load length
- 3,083 mm
- Load width
- 1,765 mm
- Load height
- 1,894 mm
- Between the wheel arches
- 1,380 mm
- Kerb weight
- 2,010 kg
- Gross vehicle weight
- 3,500 kg
This van is 1.765 mm wide, which is 135 mm short of sleeping across it if you are 1.80 m. That is the single most important thing to know about this model: a transverse bed physically fits, but you will not lie stretched out. For a fixed bed here you want the slide-out or the lengthwise bed — those sleep along the van and reach 2.050 mm whatever the width.
Of the ten layouts we have costed, 6 fit this model with room to spare. The fullest is the Transverse bed with seating: it leaves 665 mm of aisle and weighs 173 kg, leaving you 937 kg of payload for water, batteries, bikes and yourself.
Between the wheel arches it is 1.380 mm. That number matters more than the load width, because everything that runs along the floor — a bed, a bench, a run of cupboards — has to pass it or clear it. That is why our frames stand on adjustable feet and not on a continuous plinth.
What this van brings
- Standing height: 1.894 mm
What to watch out for
- Too narrow to sleep across: 135 mm short
- Dimensions from the manufacturer, not measured by us
These dimensions come from the manufacturer and have not been measured by us yet. Manufacturers measure differently; expect a deviation of 30 to 50 mm and measure your own van before ordering.
Configure this van →Layouts that fit in this van (6)
Transverse bed
Transverse bed
The most frugal fixed bed: it costs only 1.40 m of length.
- Sleeping surface
- 1400 × 1765
- Aisle
- 765 mm
- Garage
- 1.62 m³
- Payload left
- 979 kg
€1,505+717 mm space left
Adjust this layoutSeating group
Seating group
Two benches along the walls that become one bed at night.
- Sleeping surface
- 1266 × 1765
- Aisle
- 1,265 mm
- Garage
- 0 m³
- Payload left
- 976 kg
€1,645+1074 mm space left
Adjust this layoutSlide-out bed
Slide-out bed
A fixed bed with a garage that slides out to 2.05 m at night.
- Sleeping surface
- 1765 × 2050
- Aisle
- 765 mm
- Garage
- 1.85 m³
- Payload left
- 965 kg
€1,810+517 mm space left
Adjust this layoutTransverse bed
Transverse bed with a seat
A fixed bed, a full galley and still somewhere to sit.
- Sleeping surface
- 1400 × 1765
- Aisle
- 765 mm
- Garage
- 1.72 m³
- Payload left
- 958 kg
€1,975+497 mm space left
Adjust this layoutTransverse bed
Transverse bed with seating
Transverse bed, a big galley and a bench to sit on.
- Sleeping surface
- 1400 × 1765
- Aisle
- 665 mm
- Garage
- 1.62 m³
- Payload left
- 937 kg
€2,045+274 mm space left
Adjust this layoutWhat does not fit, and why
Slide-out bed with seating
You need 3209 mm and your van has 3083 mm of load length. You are 126 mm short.
Lengthwise bed
You need 3659 mm and your van has 3083 mm of load length. You are 576 mm short.
Lengthwise bed with seating for four
You need 4282 mm and your van has 3083 mm of load length. You are 1199 mm short.
Slide-out bed with two seats
You need 3409 mm and your van has 3083 mm of load length. You are 326 mm short.