Seating group
Bench bed only
Just the bed. The only layout that fits an L1.
- Sleeping surface
- 1266 × 1800
- Aisle
- 1,800 mm
- Garage
- 0 m³
- Payload left
- 762 kg
€1,315+2174 mm space left
Adjust this layout← All vans
Building a camper in a Iveco Daily L3H2
- Load length
- 3,540 mm
- Load width
- 1,800 mm
- Load height
- 1,900 mm
- Between the wheel arches
- 1,320 mm
- Kerb weight
- 2,260 kg
- Gross vehicle weight
- 3,500 kg
This van is 1.800 mm wide, which is 100 mm short of sleeping across it if you are 1.80 m. That is the single most important thing to know about this model: a transverse bed physically fits, but you will not lie stretched out. For a fixed bed here you want the slide-out or the lengthwise bed — those sleep along the van and reach 2.050 mm whatever the width.
Of the ten layouts we have costed, 8 fit this model with room to spare. The fullest is the Slide-out bed with two seats: it leaves 800 mm of aisle and weighs 204 kg, leaving you 656 kg of payload for water, batteries, bikes and yourself.
Between the wheel arches it is 1.320 mm. That number matters more than the load width, because everything that runs along the floor — a bed, a bench, a run of cupboards — has to pass it or clear it. That is why our frames stand on adjustable feet and not on a continuous plinth.
What this van brings
- Standing height: 1.900 mm
What to watch out for
- Too narrow to sleep across: 100 mm short
- Dimensions from the manufacturer, not measured by us
These dimensions come from the manufacturer and have not been measured by us yet. Manufacturers measure differently; expect a deviation of 30 to 50 mm and measure your own van before ordering.
Configure this van →Layouts that fit in this van (8)
Transverse bed
Transverse bed
The most frugal fixed bed: it costs only 1.40 m of length.
- Sleeping surface
- 1400 × 1800
- Aisle
- 800 mm
- Garage
- 1.55 m³
- Payload left
- 729 kg
€1,505+1174 mm space left
Adjust this layoutSeating group
Seating group
Two benches along the walls that become one bed at night.
- Sleeping surface
- 1266 × 1800
- Aisle
- 1,300 mm
- Garage
- 0 m³
- Payload left
- 726 kg
€1,645+1531 mm space left
Adjust this layoutSlide-out bed
Slide-out bed
A fixed bed with a garage that slides out to 2.05 m at night.
- Sleeping surface
- 1800 × 2050
- Aisle
- 800 mm
- Garage
- 1.77 m³
- Payload left
- 715 kg
€1,810+974 mm space left
Adjust this layoutTransverse bed
Transverse bed with a seat
A fixed bed, a full galley and still somewhere to sit.
- Sleeping surface
- 1400 × 1800
- Aisle
- 800 mm
- Garage
- 1.64 m³
- Payload left
- 708 kg
€1,975+954 mm space left
Adjust this layoutTransverse bed
Transverse bed with seating
Transverse bed, a big galley and a bench to sit on.
- Sleeping surface
- 1400 × 1800
- Aisle
- 700 mm
- Garage
- 1.55 m³
- Payload left
- 687 kg
€2,045+731 mm space left
Adjust this layoutSlide-out bed
Slide-out bed with seating
The same bed, with a full galley and a bench to sit on.
- Sleeping surface
- 1800 × 2050
- Aisle
- 700 mm
- Garage
- 1.88 m³
- Payload left
- 665 kg
€2,395+331 mm space left
Adjust this layoutSlide-out bed
Slide-out bed with two seats
At night the bed slides out over the two seats.
- Sleeping surface
- 1800 × 2050
- Aisle
- 800 mm
- Garage
- 1.88 m³
- Payload left
- 656 kg
€2,830+131 mm space left
Adjust this layoutWhat does not fit, and why
Lengthwise bed
You need 3659 mm and your van has 3540 mm of load length. You are 119 mm short.
Lengthwise bed with seating for four
You need 4282 mm and your van has 3540 mm of load length. You are 742 mm short.