Seating group
Bench bed only
Just the bed. The only layout that fits an L1.
- Sleeping surface
- 1266 × 1870
- Aisle
- 1,870 mm
- Garage
- 0 m³
- Payload left
- 812 kg
€1,315+2704 mm space left
Adjust this layout← All vans
Building a camper in a Fiat Ducato L4H2
- Load length
- 4,070 mm
- Load width
- 1,870 mm
- Load height
- 1,932 mm
- Between the wheel arches
- 1,422 mm
- Kerb weight
- 2,210 kg
- Gross vehicle weight
- 3,500 kg
This van is 1.870 mm wide, which is 30 mm short of sleeping across it if you are 1.80 m. That is the single most important thing to know about this model: a transverse bed physically fits, but you will not lie stretched out. For a fixed bed here you want the slide-out or the lengthwise bed — those sleep along the van and reach 2.050 mm whatever the width.
Of the ten layouts we have costed, 9 fit this model with room to spare. The fullest is the Slide-out bed with two seats: it leaves 870 mm of aisle and weighs 204 kg, leaving you 706 kg of payload for water, batteries, bikes and yourself.
Between the wheel arches it is 1.422 mm. That number matters more than the load width, because everything that runs along the floor — a bed, a bench, a run of cupboards — has to pass it or clear it. That is why our frames stand on adjustable feet and not on a continuous plinth.
What this van brings
- Standing height: 1.932 mm
What to watch out for
- Too narrow to sleep across: 30 mm short
- Dimensions from the manufacturer, not measured by us
These dimensions come from the manufacturer and have not been measured by us yet. Manufacturers measure differently; expect a deviation of 30 to 50 mm and measure your own van before ordering.
Configure this van →Layouts that fit in this van (9)
Transverse bed
Transverse bed
The most frugal fixed bed: it costs only 1.40 m of length.
- Sleeping surface
- 1400 × 1870
- Aisle
- 870 mm
- Garage
- 1.67 m³
- Payload left
- 779 kg
€1,505+1704 mm space left
Adjust this layoutSeating group
Seating group
Two benches along the walls that become one bed at night.
- Sleeping surface
- 1266 × 1870
- Aisle
- 1,370 mm
- Garage
- 0 m³
- Payload left
- 776 kg
€1,645+2061 mm space left
Adjust this layoutSlide-out bed
Slide-out bed
A fixed bed with a garage that slides out to 2.05 m at night.
- Sleeping surface
- 1870 × 2050
- Aisle
- 870 mm
- Garage
- 1.91 m³
- Payload left
- 765 kg
€1,810+1504 mm space left
Adjust this layoutTransverse bed
Transverse bed with a seat
A fixed bed, a full galley and still somewhere to sit.
- Sleeping surface
- 1400 × 1870
- Aisle
- 870 mm
- Garage
- 1.77 m³
- Payload left
- 758 kg
€1,975+1484 mm space left
Adjust this layoutTransverse bed
Transverse bed with seating
Transverse bed, a big galley and a bench to sit on.
- Sleeping surface
- 1400 × 1870
- Aisle
- 770 mm
- Garage
- 1.67 m³
- Payload left
- 737 kg
€2,045+1261 mm space left
Adjust this layoutLengthwise bed
Lengthwise bed
A fixed full-width bed with the largest garage.
- Sleeping surface
- 1870 × 2050
- Aisle
- 770 mm
- Garage
- 2.74 m³
- Payload left
- 719 kg
€2,235+411 mm space left
Adjust this layoutSlide-out bed
Slide-out bed with seating
The same bed, with a full galley and a bench to sit on.
- Sleeping surface
- 1870 × 2050
- Aisle
- 770 mm
- Garage
- 2.02 m³
- Payload left
- 715 kg
€2,395+861 mm space left
Adjust this layoutSlide-out bed
Slide-out bed with two seats
At night the bed slides out over the two seats.
- Sleeping surface
- 1870 × 2050
- Aisle
- 870 mm
- Garage
- 2.02 m³
- Payload left
- 706 kg
€2,830+661 mm space left
Adjust this layoutWhat does not fit, and why
Lengthwise bed with seating for four
You need 4282 mm and your van has 4070 mm of load length. You are 212 mm short.